In order to fix a power window motor a trained technician will need to replace all faulty components by unbolting the broken parts and replacing them with new ones.
Fix power window motor.
Locate the power window motor it s usually located near the bottom on the affected car door.
Remove the trim panel and peel off the vapor barrier.
The power window motor is much smaller than the regulator but should be located close by.
Replace the motor by pressing it into the window regulator gears then securing the mount bolts and reconnecting it to the harness.
Hold your window switch in the up position.
Then using your fist or a blunt object strike a spot in the general area where the power window motor is located.
This is a window motor from a 94 s10 blazer.
It is very easy any one can do it with simple tools if you liked this video please.
Repair your defunct car power window free at cost at home and save money.
Car power window repairs.
Attach the multimeter to the wires then activate the window switch with the car s key in the on position.
Check for operation of the window with the engine on and off and with the key in different positions.
If you are getting power in both directions of the switch then the electrical wiring to the motor is good and the motor should be replaced.
In many cases the power window repair process simply entails total replacement of the faulty components.
When you put power to it the motor will turn about an 1 8 of an inch then nothing both ways.
Technicians unbolt the old components and hook up a direct replacement to restore full functionality of your windows.
Reach into the door panel and disconnect the power connector to the window motor wear leather gloves to protect against cuts.
How long does it take to fix a power window.
If you re unsure where it is you may be able to look it up online.
The power window service does not usually take a lot of time once technicians track down the main problem.
In most applications the bolts securing the motor to the door are the same size as the regulator mounting bolts.
Within an arm s length of the bin you toggle the power window switch with one hand while the other hand fingers a token preparing to whip it into the basket just as you floor the throttle.
A trim panel removal tool is inexpensive and saves you a lot of time.
If you are not getting power to the motor wiring then you need to check for power going to the window switch.
Replace the door panel and switches then test the window.
Connect the leads of your voltmeter to the two terminals on the connector.
Remove them and set them someplace safe as well.
Locate and remove the window motor mounting bolts.