The reason you want to do it is because you need to be sure that your battery is continuously maintained in the proper way.
Fix car battery connection.
Apply a thin layer of petroleum jelly on the terminals as well as the cable ends.
1 1 the items below are telltale signs that one or more cells of your car s battery is dead or malfunctioning.
Always wear eye protection when working on car batteries and don t smoke.
There has to be a good metal on metal connection for current to flow from the battery and into the car.
Then slide the heat shrink tubing over the connection and use a heat gun to shrink it.
If the connectors become damaged or corroded the connection may be lost with the battery.
Use a stiff brush to scrub the corrosion off your car battery.
The battery cables are the first and last components in every electrical circuit in a vehicle with power leaving the battery along one cable and returning along the other.
The connection of the battery cables in a car are essential to the proper operation of the vehicle.
This won t even take that much of your time and in about 20 minutes you would have learned a new way to maintain.
A car battery is an essential tool for a vehicle.
For example it facilitates the car s ignition and headlights among other uses.
2 1 you will need the following.
How to fix the connection on your car battery.
1 the symptoms of a soon to be dead car battery.
Use the same mixture and wire brush to clean the connections at the end of the cables in your car as well.
Really bad connections completely prevent the flow of.
Use compressed air so your car battery dries entirely.
2 reconditioning or refurbishing a dead cell.
Don t forget to scrub around inside and outside the cable ends and the terminals as well.
Bad connections cause a loss of voltage increased current and poor performance.
Rinse the battery and cable ends carefully with water.
It s not so hard to check the connection on your battery.
When the connection is lost the vehicle may not start or the battery can die because it cannot receive a charge from the alternator.
But you should prevent your battery terminal from corroding.
It facilitates smooth automobile operations and assists in smooth automobile operations.
Screw on the battery terminal and tighten until snug photo 3.
2 2 procedure for reconditioning your car battery.