Bathroom door locks.
Fitting a bathroom door lock.
You may find that this process is like replacing locks and handles however you just need to remove the existing mechanism and alter the holes in the same.
This means you have to unscrew the current lock mechanism and alter the hole s to fit the new turn release set.
A video guide for fitting bathroom locks.
In this video i will be showing you how to fit a thumbturn lock on a bathroom door.
The video step by step guide to showing how best to proceed with fitting a bathroom lock just remember there are very many different types and sizes of bathroom locks.
However this all depends on whether you are replacing an existing handle or fitting it to a new door.
It is important to know what type of lock to fit on a bathroom door here you will find all of our bathroom locks ranging from the common sash lock type bathroom locks which offer a latch and a deadbolt which utilise handles for the latch and a turn to lock the door via the deadbolt through to a small tubular type bolt that does not require handles and is purely for.
Then hold either the door lock or door bolt against the edge of the door.
The removal of the existing door hardware.
To begin place a door stop to ensure that the door is locked in place.
In our how to guide we will show you how to install a bathroom lock onto a new door.
If you love my content and would like to send me a couple of to help m.
Measure the centre point of the door and draw a vertical line between the two marked points.
Mark the top and bottom of the door lock with a pencil.
How to fit a bathroom thumb turn lock.
Place the lock against the face of the door so that the locks face plate is flush with the door edge now take a pencil and make a mark through the locks spindle holes to the door face the locks spindle hole and the spindle that will lock the lock allow the handles to work the lock correctly after installation.