Use this 3 4 board as a starter strip with other kleer konceal products.
Fiber cement siding starter strip.
The ez 60 starter strip keeps bugs out and allows ventilation into the rainscreen cavity while saving labor and material costs.
Position your first course of siding inch below the starter strip and nail the siding into the studs 1 inch down from the top of the siding.
Pieces of hardieplank siding from full or partial planks.
You can make your own fiber cement starter strip by ripping a piece of hardieplank lap siding into 1 1 4 inch strips.
It s best to stagger the joints in each successive course to avoid noticeable patterns.
Install these fragile starter strips with a 15 gauge trim gun.
Vinyl siding institute 109 398 views.
A prefabricated starter strip for use behind the first course of fiber cement siding as well as above windows and doors.
Snap a line 1 in.
Use galvanized siding nails and make sure that the nails penetrate a minimum of 1 1 4 inches into the framing.
These strips installed at the bottom will make your first row of siding angle out to match the rest of the rows.
Find your most beat up pieces of siding and rip them down into 1 1 4 in.
This makes kleerstart a prefered choice as a starter board for fiber cement siding.
Durable and impact resistant power nailable or install with staples or screws use siding manufacturer s recommended fastener.
Do not overdrive the nails.
Vsi best practices installing a starter strip duration.
James hardie 12 in x 144 in hz5 hardieplank cedarmill fiber cement lap siding.
Then you would install your fiber cement corner and window trim.
Install a starter strip hardieplank lap siding requires a starter strip beneath the first course to set it on the proper angle and to create a proper drip edge at the bottom of the siding.
Made with innovative cellular pvc kleerstart offers the durability to tackle tough exterior applications where the board may be exposed to masonry or moisture.
Find vinyl siding starter strips at lowe s today.
Fiber cement lap siding beveled starter strips.
How to stagger lap siding for walls longer than 12 feet you ll need to butt additional lengths of siding together.
Above the bottom of the wall sheathing as a guide.