With 1 2mm ﬂ at bar spacers under the motor.
Et 500 gate motor wiring diagram.
Power supply1 at gate technical data et 500 12v et 500 acdc maximum absorbed current 220v ac supply motor voltage maximum starting.
Now move the actuator until the close led lights up.
Technical data drive 500 drive 600 rated gate mass.
All goods are warranted to be free from faulty components and manufacture.
Et 500 residential sliding gate motor et500 barcode.
Popular et motors include the et drive 500 and the et drive 1000.
N a designed for residential sliding gates up to 500 kg proven high speed advanced electronics security.
Sliding gate motors installation manual v3 pre2008 1 55mb d3 d5 a5 sliding gate motors installation manual pre feb 2005 1 4mb d3 d5 sliding gate motors installation manual oct 2005 1 5mb sliding gate motors installation manual v2 pre2005 1 41mb d3 d5 sliding gate motors quick programming guide 377kb.
On board led inputs indication.
Gates co za recommend installing et drive sliding gate motors as they are less likely to get stolen for the following reasons.
The motor unit has an anti theft alarm system built into it.
Et 500 plus acdc complex.
All et nice pty ltd garage door operators are supplied with a sealed 15a safety plug on lead for use in an electrical code of prac ce.
Encoder monitoring led indication.
Page 15 wiring and termina on of the control card.
Passive infra red access control option.
Programming selecting mode options 6 7 10 17 20 5 3.
Courtesy light output external led status indication.
Systems carry a 12 month factory warranty from date of invoice.
Fasten rack to the gate allowing to rest ﬁ rmly on the.
Wiring schematics 7.
Page 2 one year manufacturer s warranty all goods manufactured by g c electronics cc t a e t.
Setting the gate close actuator close the gate with approximately 15 20mm gap between gate and close stopper.
Page 1 et 500 automatic slide gate motor user s manual for et 500 12v et 500 acdc models revised date.
Switch or the spring on the motor when the gate is in the close and open position.
Fit limit switch actuators with screws provided onto the nylon rack.