As an alternative use the tag all not tagged tool to tag all untagged rooms in a view.
Add room tags to demo floor plan revit.
Now all we need to do is click inside an enclosed space.
Click on the small rectangle and set the correct global parameter.
This tool can be useful for example when you place and tag rooms in a floor plan view and you want to see tags for the same rooms in a reflected ceiling plan rcp view.
In most revit templates the basic phases are existing and new.
Either in plans elevations sections etc.
Further along on the ribbon menu you will find a panel named room area.
For most project this is all you will need.
This tells revit that we wish to add a room object to our model.
Now let s add tags.
Set the phase to demolition and set the phase filter to show previous demo.
The hammer sets the elements demo phase to whatever view you are in.
To start adding revit room switch to the architecture menu.
Now go back to your floor plan view.
Go ahead and click the room icon.
You can think of a revit room.
To tag a room open a plan or section.
But instead of selecting objects one by one let s just tag all our doors and windows.
Open your original 1st floor plan and compare to this one.
Create an existing floor plan.
Create a demolition floor plan.
Right now all we are doing is creating dumb tags as in copying from the floor plan to the ceiling plan.
I am having problems with tagging the rooms in the ceiling plans.
Demolished elements can be set for demolition in the new phase.
Why is it that when i place a room tag in a room already define in the floor plan the ceiling plan does not read the room.
A common mistake is to create a demolition phase.
6 assign global parameter to room.
This is how you represent different views for your model.
You can manually add tags one by one by using tag by category.
You have to be extra careful in this step to make sure you are using the correct parameter else you will cause chaos and.
Go back to your existing floor plan with the room names and select all the rooms.
Finally in your demo floor plans.
Use 2 views overlaid to add rooms and tags to the demolition plan.
In the parameter you should see the ceiling height parameter.
Place rooms and tag rooms in the existing floor plan.
However when we do that we encounter another problem.
There is no need for that.
You want to select the blue squares.