What makes a water fountain ada compliant.
Ada drinking fountain height.
The low drinking fountain must have the spout located not more than 36 inches above the finished floor.
The 2010 ada requires that a minimum of two drinking fountains be provided when drinking fountains are part of the project.
To be ada compliant a drinking fountain must meet certain requirements.
Water coolers and bottle fillers can be provided at or integrated with compliant drinking fountains.
These regulations adopted revised enforceable accessibility standards called the 2010 ada standards for accessible design 2010 standards or standards.
The ada has height requirement provisions for counters tables and other articles where wheelchair use could impair a person s ability to effectively maneuver work and rest.
The americans with disabilities act ada requires wall mounted drinking fountain units to have a clear knee space of at least 27 high 30 wide and 17 to 19 deep.
They should also have a minimum clear floor space of 30 by 48 for wheelchair accommodation.
The usual request from tall people is the higher the better the building code now states there must be a minimum of two drinking fountains.
Drinking fountains or water coolers required to be accessible by 4 1 shall comply with 4 15.
Spout height and knee.
50 should be for wheelchair users adults and 50 should be for standing adults that can t bend down.
There are specific regulations related for knee clearance floor space in front of or beside the fountain spout location and height and location of the control.
Ada drinking fountain regulations.
Drinking fountains shall comply with 307 and 602.
Drinking fountains drinking fountains that comply with ada regulations must be no taller than 36 inches as measured from the floor to the water spout.
Spout height and knee clearance.
602 2 clear floor space.
One thing to keep in mind when designing for children is that you still have to maintain the requirements for adults.
4 15 drinking fountains and water coolers.
Spouts shall be no higher than 36 in 915 mm measured from the floor or ground surfaces to the spout outlet.
The department of justice published revised regulations for titles ii and iii of the americans with disabilities act of 1990 ada in the federal register on september 15 2010.
If a drinking fountain is provided a water cooler bottle filler or nearby sink cannot substitute for either the wheelchair accessible or the standing height drinking fountain in new construction additions or alterations.
The high drinking fountain must have the spout mounted 38 to 43 inches above the finished floor.
Units shall have a clear floor or ground space complying with 305 positioned for a forward approach and centered on the unit.