Jigsaw blades with finer teeth on the other hand need to be used with the jigsaw at slower speeds as these will quickly heat up in just moments.
Acrylic sheet cutting blade.
To cut acrylic sheets start by marking the line you want to cut using a ruler and a permanent marker.
Use acrylic jigsaw blades to cut acrylic with a jigsaw.
Diablo d1080n plastic cutting saw blade.
If the blades are much wider you run the risk of chipping your plastic.
A jigsaw is one preferred tools for cutting acrylic sheets.
Once you ve scored the initial line go over it a few times with the blade until a groove forms.
Don safety goggles and gloves for protection.
Place the sheet down flat on a table or a work station so you can measure and cut on a stable surface.
There are special blades designed expressly for acrylic but any metal cutting blade.
It is a small handheld tool that can cut the sheet with straight blade by function up and down in fast motion.
Lay the plexiglass flat on a work surface.
Use a 7 1 4 plastic cutting saw blade to cut acrylic with a circular saw.
Use a plastic laminate scorer to cut acrylic by hand.
Acrylic sheet larger than the size of your project.
Fit a circular saw or table saw with a fine blade with crosscut teeth to prevent chipping the piece during the cut.
While you can use blades designed for wood there are ones specifically designed for acrylic which is best for frequent cutting projects.
Materials needed to cut acrylic or plexiglass sheets.
For thicker sheets of plexiglass cut with a power saw be it a circular saw saber saw or table saw.
Cutting with a jigsaw.
Cutting plexiglass can result in splinters or shards that can pose a hazard.
Use a 10 plastic cutting saw blade to cut acrylic on a miter saw or table saw.
Because heat is the enemy of plexiglass and choosing the wrong type of blade may get you terrible results like melting the plastic due to the overheating in the blade.
For cutting acrylic and plastic sheets efficiently a bi metal blade with sharp teeth and a medium tooth count 10 16 work well at moderate speeds.
Make sure the surface is clean and clear of any objects that could impede your work or potentially mark or.
The diablo is a pioneering company in the manufacture of circular blades the diablo d1080n has been designed for cutting non ferrous metals and plastic materials especially the acrylic.
Best circular blades for cutting plastic sheets.
However if you are intended to cut acrylic into a nonlinear fashion then jigsaw is the right option for you.
Acrylic is different than cutting many other materials because the dimensions need to be exact to ensure proper fitting with other pieces.
Then score the line using a plastic scoring blade using the ruler as a guide so your line is straight.
Best blades for cutting plexiglass sheets.